NUMERICAL MODELING OF TEMPERATURE PLUME FORMATION OF NON-ISOTHERMAL LIQUID INJECTIONS

  • S.A. Bolegenova Research Institute of Experimental and Theoretical Physics, al-Farabi Kazakh National University, Al-Farabi Avenue, 71, Almaty, Kazakhstan; al-Farabi Kazakh National University, Al-Farabi Avenue, 71, Almaty, Kazakhstan
  • A.S. Askarova Research Institute of Experimental and Theoretical Physics, al-Farabi Kazakh National University, Al-Farabi Avenue, 71, Almaty, Kazakhstan; al-Farabi Kazakh National University, Al-Farabi Avenue, 71, Almaty, Kazakhstan
  • Sh.S. Ospanova Al-Farabi Kazakh National University, Al-Farabi Avenue, 71, Almaty, Kazakhstan
  • A.N. Aldiyarova Research Institute of Experimental and Theoretical Physics, al-Farabi Kazakh National University, Al-Farabi Avenue, 71, Almaty, Kazakhstan
Keywords: liquid fuel, spray, temperature flame, computational experiment, combustion

Abstract

This paper presents the results of computational experiments to study the formation of a spray and a temperature plume of non-isothermal liquid injections under high turbulence. Numerical modeling of atomization and combustion of liquid fuel injections and the influence of the initial gas temperature in the combustion chamber on these processes has been carried out. The temperature in the combustion chamber varied from 700 K to 1500 K for two types of liquid fuels: octane and dodecane. The distributions of liquid fuel droplets along the radii and temperature at various points in time are constructed. The influence of the initial temperature on the concentration characteristics of various types of fuel is revealed. As a result, it was found that at a pressure of over 80 bar with high turbulence, the gas temperature equal to 900 K was taken as optimal. At this temperature, the chamber is heated to high temperatures and the concentration of the resulting reaction products is the lowest. The obtained results can be applied in the construction of the liquid fuels’ combustion theory and will contribute to a deeper understanding of the complex physical and chemical phenomena that occur in combustion chambers.

References

(1). Xu C, Nie W, Liu Z, Peng H, Yang S, Liu Q (2019) Energy 182:544–558. Crossref

(2). Chen H, Su H, Li J, Zhong X (2019) Energy 171:981– 999. Crossref

(3). Chen Z, Wang Z, Lei T, Gupta AK (2021) Journal of Biobased Materials and Bioenergy 15:163– 170. Crossref

(4). Pillai AL, Nagao J, Awane R, Kurose R (2020) Combustion and Flame 220:337–356. Crossref

(5). Ferreira SL, dos Santos AM, de Souza GR, Polito WL (2008) Energy 33:1801–1806. Crossref

(6). Wang Z, Yelishala SC, Yu G, Metghalchi H, Levendis YA (2019) Energy Fuels 33:9403– 9418. Crossref

(7). Messerle VE, Safarik P, Maximov V, Askarova AS (2019) Thermophysics and Aeromechanics 26:925–937. Crossref

(8). Messerle V, Askarova A, Ustimenko A (2016) Thermophysics and Aeromechanics 231:125– 134. Crossref

(9). Khalil AEE, Gupta AK (2016) Fuel 171:116–124. Crossref

(10). Bolegenova SA, Beketayeva MT (2018) High Temperature 56:738–743. Crossref

(11). Amsden DC, Amsden AA (1993) IEEE Transactions on Professional Communication Journal 36(4):190–195. Crossref

(12). Amsden AA, O’Rourke PJ, Butler TD (1989) KIVA-II: A computer program for chemically reactive flows with sprays. Los Alamos. P.160. Crossref

(13). Gorokhovski M, Herrmann M (2008) Annual Review of Fluid Mechanics 40:343–366. Crossref

(14). Durand P, Gorokhovski M, Borghi R (1999) Combustion science and technology 144(1):47– 48. Crossref

(15). Liu Z, Zhou H, Wei D, Fang H (2021) Journal of the Energy Institute 98:346–353. Crossref

(16). Gorokhovski MA, Saveliev VL (2003) Physics of Fluids 15(1):184–192. Crossref

(17). Gao Z, Lin Sh, Ji J, Li M (2019) Energy 170:349– 355. Crossref

(18). Ashraful AM, Masjuki HH, Kalam MA, Rizwanul Fattah IM, Imtenan S, Shahir SA, Mobarak HM (2014) Energy Conversion and Management 80:202–228. Crossref

(19). Askarova AS., Ospanova ShS (2016) Bulgarian Chemical Communications 48:229–235.

(20). Zhang Y, Sahir AH, Tan Eric CD, Talmadge MS, Davis R, Biddy JM, Tao L (2018) Green Chemistry 20:5358–5373. Crossref

(21). Bolegenova S, Ospanova Sh (2018) Journal of engineering and applied sciences 13:4054–4064.

(22). Mitroglou N, Nouri JM, Gavaises M, Arcoumanis C (2006) International Journal of Engine Research 7:255–270. Crossref

(23). Wang C, Adams M, Luo T, Jin T, Luo F, Gavaises M (2020) International Journal of Engine Research 22:3233–3246. Crossref

Published
2022-02-21
How to Cite
Bolegenova, S., Askarova, A., Ospanova, S., & Aldiyarova, A. (2022). NUMERICAL MODELING OF TEMPERATURE PLUME FORMATION OF NON-ISOTHERMAL LIQUID INJECTIONS. COMBUSTION AND PLASMA CHEMISTRY, 20(1), 63-72. https://doi.org/10.18321/cpc482